Otto-von-Guericke-Universität Magdeburg

Hilfsnavigation

• Darstellungen: Standard | Barrierefrei
• Sitemap
• Impressum
• Kontakt

Suche

Sprachauswahl

• ← Fakultät
• IFAT
• Lehrstühle und Fachgebiete
• Forschung
• Lehre

Direktlinks

Krümelnavigation

Textanfang

Promotion

Hadlich, Thomas (2015): Verwendung von Merkmalen im Engineering von Systemen. Dissertation. Otto-von-Guericke-Universität, Magdeburg. Fakultät für Elektro- und Informationstechnik. PDF

Journals

Fay, Alexander; Vogel-Heuser, Birgit; Frank, Timo; Eckert, Karin; Hadlich, Thomas; Diedrich, Christian (2015): Enhancing a model-based engineering approach for distributed manufacturing automation systems with characteristics and design patterns. In Journal of Systems and Software.

Konferenzbeiträge

Hadlich, Thomas; Diedrich, Christian (2014): Verwendung von Merkmalen für die funktionale Modellierung. Merkmale in frühen Phasen des System-Engineering. In : Automation 2014. 15. Branchentreff der Mess- und Automatisierungstechnik : Smart X - powered by automation. Kongresshaus Baden-Baden, 01. und 02. Juli 2014 (VDI-Berichte, 2231), pp. 15–28.

Hadlich, Thomas; Diedrich, Christian (2013): Using properties in systems engineering. In : ETFA 2013. IEEE 18th International Conference on Emerging Technologies and Factory Automation. IEEE International Conference on Emerging Technologies & Factory Automation; ETFA. Cagliari, Italy, 10 - 13 Sept. 2013. IEEE; IEEE Industrial Electronics Society. Piscataway, NJ: IEEE.

Hadlich, Thomas; Sokolov, Sergiy; Diedrich, Christian (2013): Beurteilung der Komplexität von Engineering Modellen. In : Automation 2013. 14. Branchentreff der Mess- und Automatisierungstechnik, Kongresshaus Baden-Baden, 25.und 26. Juni, 2013: VDI-Verlag (2209), pp. 405–410.

Eckert, Karin; Fay, Alexander; Hadlich, Thomas; Diedrich, Christian; Frank, Timo; Vogel-Heuser, Birgit (2012): Design Patterns for Distributed Automation Systems with Consideration of Non-Functional Requirements. In : ETFA 2012. IEEE 17th Conference on Emerging Technologies & Factory Automation. Krakow, Poland, September 17-21, 2012. IEEE; IEEE Industrial Electronics Society. Piscataway, NJ: IEEE Press (CD-ROM), checked on 4/15/2013.

Frank, Timo; Eckert, Karin; Hadlich, Thomas; Fay, Alexander; Diedrich, Christian; Vogel-Heuser, Birgit (2012): Workflow and decision support for the design of distributed automation systems. In : INDIN 2012. IEEE 10th International Conference on Industrial Informatics. 10th IEEE International Conference on Industrial Informatics (INDIN), 2012. Bejing, China, 25-27 July 2012. IEEE. Piscataway, NJ: IEEE Press, pp. 293–299.

Frank, Timo; Hadlich, Thomas; Eckert, Karin; Diedrich, Christian; Vogel-Heuser, Birgit (2012): Erweiterung des V-Modells für den Entwurf von verteilten Automatisierungssystemen. In Ulrich Jumar, Eckehard Schnieder, Christian Diedrich (Eds.): EKA 2012. Entwurf komplexer Automatisierungssysteme. Entwurf komplexer Automatisierungssysteme. ifak/OvGU Magdeburg. Magdeburg, checked on 11/9/2012.

Hadlich, Thomas; Engel, Christoph; Diedrich, Christian; Mühlhause, Mathias (2012): Konzept und Erfahrungen beim Abgleich mehrerer Domain-Ontologien. In Ulrich Jumar, Eckehard Schnieder, Christian Diedrich (Eds.): EKA 2012. Entwurf komplexer Automatisierungssysteme. Entwurf komplexer Automatisierungssysteme. ifak/OvGU Magdeburg. Magdeburg, pp. 81–90.

Hadlich, Thomas; Höme, Stephan; Diedrich, Christian; Eckert, Karin; Frank, Timo; Fay, Alexander; Vogel-Heuser, Birgit (2012): Time as non-functional requirement in distributed control systems. In : ETFA 2012. IEEE 17th Conference on Emerging Technologies & Factory Automation. Krakow, Poland, September 17-21, 2012. IEEE; IEEE Industrial Electronics Society. Piscataway, NJ: IEEE Press (CD-ROM).

Frank, Timo; Hadlich, Thomas; Eckert, Karin; Fay, Alexander; Diedrich, Christian; Vogel-Heuser, Birgit (2012): Using contact points to integrate discipline spanning real-time requirements in modeling Networked Automation Systems for manufacturing systems. In : 2012 IEEE International Conference on Automation Science and Engineering (CASE). Green automation toward a sustainable society. Conference on Automation Science and Engineering (CASE). Seoul, Korea, August 20-24, 2012. IEEE. Piscataway, NJ: IEEE, pp. 851–856, checked on 2/25/2013.

Mühlhause, Mathias; Hadlich, Thomas; Diedrich, Christian (2012): Modellbewertung für ein durchgängiges Engineering. In : Modellierung in der Automatisierungstechnik (MAT 2012), checked on 10/29/2013.

Eckert, Karin; Frank, Timo; Hadlich, Thomas; Fay, Alexander; Vogel-Heuser, Birgit; Diedrich, Christian (2011): Typical Automation Functions and Their Distribution in Automation Systems. In : ETFA 2011. IEEE 16th International Conference on Emerging Technologies and Factory Automation. IEEE International Conference on Emerging Technologies & Factory Automation; ETFA. Toulouse, France, September 5-9, 2011. IEEE; IEEE Industrial Electronics Society. Piscataway, NJ: IEEE Press, checked on 2/3/2012.

Frank, Timo; Merz, Martin; Eckert, Karin; Hadlich, Thomas; Vogel-Heuser, Birgit; Fay, Alexander; Diedrich, Christian (2011): Dealing with non-functional requirements in Distributed Control Systems Engineering. In : ETFA 2011. IEEE 16th International Conference on Emerging Technologies and Factory Automation. IEEE International Conference on Emerging Technologies & Factory Automation; ETFA. Toulouse, France, September 5-9, 2011. IEEE; IEEE Industrial Electronics Society. Piscataway, NJ: IEEE Press, checked on 2/3/2012.

Hadlich, Thomas; Diedrich, Christian; Eckert, Karin; Frank, Timo; Fay, Alexander; Vogel-Heuser, Birgit (2011): Common communication model for distributed automation systems. In : INDIN 2011. IEEE 9th International Conference on Industrial Informatics. IEEE 9th International Conference on Industrial Informatics. Caparica, Lisbon, Portugal, 26-29 July 2011. IEEE. Piscataway, NJ: IEEE Press, pp. 131–136.

Frenzel, Roman; Hadlich, Thomas; Wollschläger, Martin; Diedrich, Christian (2010): Tool Support for the Development of IEC 62390 compliant Fieldbus Profiles. In : ETFA 2010. IEEE 15th International Conference on Emerging Technologies and Factory Automation. IEEE International Conference on Emerging Technologies & Factory Automation; ETFA. Bilbao, Spain,, 13 - 16 September 2010. IEEE; IEEE Industrial Electronics Society. Piscataway, NJ: IEEE Press, pp. 1–4.

Hadlich, Thomas; Mühlhause, Mathias; Diedrich, Christian (2010): Discovery and integration of information in a heterogeneous environment. In : ETFA 2010. IEEE 15th International Conference on Emerging Technologies and Factory Automation. IEEE International Conference on Emerging Technologies & Factory Automation; ETFA. Bilbao, Spain,, 13 - 16 September 2010. IEEE; IEEE Industrial Electronics Society. Piscataway, NJ: IEEE Press, pp. 1–8.

Niemann, Karl-Heinz; Schmid, Frank; Hadlich, Thomas; Gunzert, Michael (2010): FDT 2.0 - Ein Bericht zur Aktualisierung des FDT-Standards. In : Automation 2010. Der 11. Branchentreff der Mess- und Automatisierungstechnik ; Kongress Baden-Baden, 15. und 16. Juni 2010. Gesellschaft Mess- und Automatisierungstechnik. Düsseldorf: VDI-Verlag (VDI-Berichte, 2092, CD-ROM), pp. 143–148.

Hadlich, Thomas (2006): Providing device integration with OPC UA. In : INDIN 2006. 4th IEEE International Conference on Industrial Informatics. Singapore, June 2006. IEEE. Piscataway, NJ: IEEE Press, pp. 263–268.

Riedl, Matthias; Thron, Mario; Hadlich, Thomas (2001): DriveServer-significantly reduce in engineering expense. In : IECON 2001. The 27th Annual Conference of the IEEE Industrial Electronics Society, vol. 1. Denver, Colorado, USA, Nov 29 (Thu) to Dec 2 (Sun) 2001. IEEE Industrial Electronics Society. Piscataway, NJ: IEEE Press, pp. 285–288.

Hadlich, Thomas; Szczepanski, Thorsten (1999): OPC - Making the Fieldbus Interface Transparent. In Dietmar Dietrich, Peter Neumann, H. Schweinzer (Eds.): Fieldbus technology. Systems integration, networking, and engineering; proceedings of the Fieldbus Conference FeT'99. Fieldbus Conference FeT'99. Magdeburg, Federal Republic of Germany, September 23-24, 1999. Wien, New York: Springer.

Hadlich, Thomas (1997): Proposing graphic extensions to VHDL. In : VHDL International Users' Forum. Proceedings : fall conference, October 19-22, 1997, Arlington, VA. VHDL International Users' Forum, fall conference. Arlington, VA, October 19-22, 1997. VHDL International. Los Alamitos, California: IEEE Computer Society Press, pp. 109–115.

Hadlich, Thomas (1997): Use of VHDL within an system level design flow. In : VHDL International Users' Forum. Proceedings : fall conference, October 19-22, 1997, Arlington, VA. VHDL International Users' Forum, fall conference. Arlington, VA, October 19-22, 1997. VHDL International. Los Alamitos, California: IEEE Computer Society Press.

Zeitschriften

Höme, Stephan; Grützner, Jens; Hadlich, Thomas; Diedrich, Christian; Schnäpp, Dieter; Arndt, Susanne; Schnieder, Eckehard (akzeptierter Beitrag): Semantic Industry: Herausforderungen auf dem Weg zur rechnergestützten Informationsverarbeitung der Industrie 4.0. In at - Automatisierungstechnik.

Diedrich, Christian; Hadlich, Thomas (2013): Geräteintegration in AT-Systeme. In atp edition – Automatisierungstechnische Praxis 55 (10), pp. 46–55.

Frank, Timo; Eckert, Karin; Hadlich, Thomas; Fay, Alexander; Diedrich, Christian; Vogel-Heuser, Birgit (2013): Erweiterung des V-Modells ® für den Entwurf von verteilten Automatisierungssystemen. In at - Automatisierungstechnik 61 (2), pp. 79–91. DOI: 10.1524/auto.2013.0009.

Simon, René; Laubenstein, Achim; Hadlich, Thomas; Riedl, Matthias (2007): Elektronische Gerätebeschreibungen via FDT im Leitsystem genutzt. In atp – Automatisierungstechnische Praxis (11), pp. 22–28.

Simon, René; Laubenstein, Achim; Hadlich, Thomas; Riedl, Matthias (2007): Using Electronic Device Descriptions via FDT in Control Systems. In atp International - Automation Technology in Practise (2), pp. S. 6 - 12.

Hadlich, Thomas (2004): OPC Commands. In Praxis Profiline - OPC.

Reports

Hadlich, Thomas (2015): Orchestration of cyber-physical systems based on properties. IFAT-LIA 1/2015. Technical Report. Otto-von-Guericke-Universität, Magdeburg. Institut für Automatisierungstechnik. PDF

Hadlich, Thomas (2014): Implementing PROFIBUS Support for FORTE. IFAT-LIA 1/2014. Technical Report. Otto-von-Guericke-Universität, Magdeburg. Institut für Automatisierungstechnik. PDF

Hadlich, Thomas (2013): Using characteristics during system design. IFAT-LIA 1/2013. Technical Report. Otto-von-Guericke-Universität, Magdeburg. Institut für Automatisierungstechnik. PDF

Hadlich, Thomas; Wild, Patrick; Foshyn, Igor; Wegers, Johann; Meyer, Thomas (2013-2015): Wiki zum Flexiblen Fertigungssystem. Report. Otto-von-Guericke-Universität, Magdeburg. Institut für Automatisierungstechnik. Available online at https://wikis.ovgu.de/lia/doku.php?id=flexibles_fertigungssystem:start. (accessible only from OvGU)

Hadlich, Thomas (2012): Complexity metrics for Engineering Models. IFAT-LIA 2/2012. Technical Report. Otto-von-Guericke-Universität, Magdeburg. Institut für Automatisierungstechnik. PDF

Hadlich, Thomas; Höme, Stephan; Diedrich, Christian; Eckert, Karin; Frank, Timo; Fay, Alexander; Vogel-Heuser, Birgit (2012): Time as non-functional requirement in distributed control systems. IFAT-LIA 1/2012. Technical Report. Otto-von-Guericke-Universität, Magdeburg. Institut für Automatisierungstechnik. PDF

Vorträge

Hadlich, Thomas (2014): Wie funktioniert FDT in Verbindung mit OPC UA. Forum Industrial Automation 2014. FDT Group. Frankfurt/Main, 9/30/2014.

Hadlich, Thomas (2010): OPC-UA mit FDT. Workshop "FDT - Aktueller Stand und zukünftige Arbeiten". ifak; ZVEI. Frankfurt/Main, 2010.

Sonstige

Hadlich, Thomas (2013): OPC Commands. http://www.opcconnect.com/commands-intro.php, Geprüft am: 01.08.2013.

Hadlich, Thomas; Szczepanski, Thorsten (2002): Performance von OPC beim zyklischen Datentransport, ifak-system, 2002.

Hadlich, Thomas; Szczepanski, Thorsten (1996): The Ode System - A SDL Based Approach to Hardware-/Software-Codesign. In C. Müller-Schloer (Ed.): Embedded microprocessor systems. Amsterdam, Washington, DC: IOS Press.